PL EN
 
PL EN
Current issue
Archive
About the Journal
Editorial Team
Reviewers
Reviewing procedure

Topic Technology of deposit excavation in underground and strip mining

 

Influence of remnant size on the geomechanical situation and safety in the mining field based on numerical modeling
Karolina Anna Adach-Pawelus, Daniel Pawelus
Mining Science 2025;32:47-63
DOI: https://doi.org/10.37190/msc/205922
 

Control of karsts caves safety in the Połom Limestome Quarry
Zbigniew Bednarczyk, Maria Brych, Slawomir Patla
Mining Science 2025;32:7-29
DOI: https://doi.org/10.37190/msc/205340
 

Predicting the working time of multi-ply conveyor belt splices in underground mines
Mirosław Bajda
Mining Science 2024;31:259-274
DOI: https://doi.org/10.37190/msc243115
 

Selecting a mining warehouse location
Stojance Mijalkovski, Kemajl Zeqiri, Dejan Mirakovski, Daniela Mijalkovska
Mining Science 2024;31:231-247
DOI: https://doi.org/10.37190/msc243113
 

Underground testing of load bearing capacity of rock bolting as part of the verification of its proper selection.
Dariusz Lubryka, Maciej Madziarz
Mining Science 2023;30:63-81
DOI: https://doi.org/10.37190/msc233004
 

Examination and assessment of the impact of working conditions on operating parameters of selected conveyor belts
Mirosław Bajda, Monika Hardygóra
Mining Science 2022;29:165-178
DOI: https://doi.org/10.37190/msc222910
 

Prospective zone of thermal water occurrence in the area of the Orlica-Śnieżnik dome
Barbara Kiełczawa, Elzbieta Liber-Makowska
Mining Science 2021;28:263-261
DOI: https://doi.org/10.37190/msc212819
 

Medicinal CO2-rich water deposits in the Polish part of the Sudetes
Elżbieta Liber-Makowska, Barbara Kiełczawa
Mining Science 2021;28:247-261
DOI: https://doi.org/10.37190/msc212818
 

Influence of adhesion on stress-strain condition alongside of a full column resin cartridge rock bolt
Kateryna Sheptak, Ivan Sakhno, Waldemar Bolesław Korzeniowski, Svetlana Sakhno
Mining Science 2021;28:233-245
DOI: https://doi.org/10.37190/msc212817
 

Methodology for underground mining method selection
Stojance Mijalkovski, Dragi Peltechki, Zoran Despodov, Dejan Mirakovski, Vancho Adjiski, Nikolinka Doneva
Mining Science 2021;28:201-216
DOI: https://doi.org/10.37190/MSC212815
 

Computational Model of the Basic Efficiency Parameters of the Bucket Wheel Excavator Working in a Block With a Vertical Obstacle
Anna Nowak-Szpak
Mining Science 2021;28:189-200
DOI: https://doi.org/10.37190/msc212814
 

Comparison of Statistical versus Stochastic Models for Work Index Determination in Quartz-Marble Mixtures
Sebastian Pérez, Juan Vargas, Miguel Mellado, Ricardo Quevedo, Juan Jarufe, Juan Hurtado, Angelica Muñoz, Pamela Jara
Mining Science 2021;28:127-140
DOI: https://doi.org/10.37190/msc212810
 

Intelligent algorithms for routing sensory networks operating in explosion hazard zones
Krzysztof Stankiewicz, Jerzy Jagoda, Matthew Tonkins
Mining Science 2021;28:103-115
DOI: https://doi.org/10.37190/MSC212808
 

Geomechanical substantiation of parameters of technology for mining salt deposits with a backfill
Jarosław Marek Rybak, Cheynesh Kongar-Syuryun, Yulia Tyulyaeva, Albert M. Khayrutdinov, Ivan Akinshin
Mining Science 2021;28:19-32
DOI: https://doi.org/10.37190/msc212802
 

Analyzing Method to Evaluate Effect of Roadway Pressure Relief
Lei Fan, Weijun Wang, Chao Yuan
Mining Science 2020;27:283-302
DOI: https://doi.org/10.37190/msc202719
 

UNIVERSAL APPROACH FOR RISK IDENTIFICATION AND EVALUATION IN UNDERGROUND FACILITIES
Witold Pytel, Krzysztof Fuławka, Bogumiła Pałac-Walko, Piotr Mertuszka, Jan Kisiel, Panu Jalas, Jari Joutsenvaara, Vitali Shekov
Mining Science 2020;27:165-181
DOI: https://doi.org/10.37190/MSC202712
 

METHOD FOR LABORATORY TESTING RUBBER PENETRATION OF STEEL CORDS IN CONVEYOR BELTS
Dariusz Woźniak, Monika Hardygóra
Mining Science 2020;27:105-117
DOI: https://doi.org/10.37190/msc202708
 

THEORETICAL ANALYSIS OF SUPPORT STABILITY IN LARGE DIP ANGLE COAL SEAM MINED WITH FULLY-MECHANIZED TOP COAL CAVING
Yucheng Ji, Yinghua ZHANG, Zhian HUANG, Zhenlu SHAO, Yukun GAO
Mining Science 2020;27:73-87
DOI: https://doi.org/10.37190/msc202706
 

Geomechanics of interference between the operation modes of mine working support elements at their loading
Volodymyr Bondarenko, Iryna Kovalevska, Gennadiy Symanovych, Vadym Sotskov, Mykhaylo Barabash
Mining Science 2018;25:219-235
DOI: https://doi.org/10.5277/msc182515
 

Influence of pick layouts on the performance of bolter miner cutting head
Shuo Qiao, Ailun Wang, Zaizheng Liu, Yimin Xia, Jinshu Liu
Mining Science 2018;25:161-174
DOI: https://doi.org/10.5277/msc182511
 

Laboratory Tests on e-pellets effectiveness for ore tracking
Witold Kawalec, Ryszard Błażej, Martyna Konieczna, Robert Król
Mining Science 2018;25:7-18
DOI: https://doi.org/10.5277/msc182502
 

THE SELECTION OF AN UNDERGROUND MINING METHOD USING THE FUZZY TOPSIS METHOD: A CASE STUDY IN THE KAMAR MAHDI II FLUORINE MINE
Mohammad Javanshirgiv, Mohsen Safari
Mining Science 2017;24:161-181
DOI: https://doi.org/10.5277/msc172410
 

ORIGINAL APPROACH FOR THE DRILLING PROCESS OP-TIMIZATION IN OPEN CAST MINES; CASE STUDY OF KEF ESSENOUN OPEN PIT MINE NORTHEAST OF ALGERIA
Khaled RAIS, Mohamed KARA, Riheb HR HADJI, Larbi GADRI, Lakhder KHOCHMEN
Mining Science 2017;24:147-159
DOI: https://doi.org/10.5277/msc172409
 

CONTRIBUTION TO THE MAINTENANCE OF T4 BH DRILLING MACHINE (CASE OF THE MINE OF BOUKHADRA, ALGERIA)
Aoulmi Zoubir, Abdi Noura, Nouiri Yamina
Mining Science 2017;24:73-83
DOI: https://doi.org/10.5277/msc172404
 

GEOPHYSICAL, GEOTECHNICAL, AND SPELEOLOGIC ASSESSMENT FOR KARST-SINKHOLE COLLAPSE GENESIS IN CHERIA PLATEAU (NE ALGERIA)
Ridha Mouici, Fethi BAALI, Riheb HADJI, Djamel BOUBAYA, Philippe Audra, Chems-Éddine Fehdi, Didier Cailhol, Stéphane Jaillet, Bruno Arfib
Mining Science 2017;24:59-71
DOI: https://doi.org/10.5277/msc172403
 

Theoretical basis for determining rolling resistance of belt conveyors
Martyna Konieczna, Lech Gładysiewicz
Mining Science 2016;23:105-119
DOI: https://doi.org/10.5277/msc162309
 

Mining problems of underground coal gasification – reflections based on experience gained in experiment conducted in Katowicki Holding Węglowy S.A. Wieczorek coal mine
Józef Dubiński, Marian Turek
Mining Science 2016;23:7-20
DOI: https://doi.org/10.5277/msc162301
 

Laboratory testing of conveyor textile belt joints used in underground mines
Monika Hardygóra, Mirosław Bajda, Ryszard Błażej
Mining Science 2015;22:161-169
DOI: https://doi.org/10.5277/msc152211
 

SPECIFIC ENERGY CONSUMPTION – THE COMPARISON OF BELT CONVEYORS
Natalia Suchorab
Mining Science 2019;26:263-274
DOI: https://doi.org/10.37190/msc192619
 

SEQUENCING OF ORE COLUMNS FOR PLANNING OF LARGE UNDERGROUND MINES
Hylke Glass, Gert Van Hout
Mining Science 2019;26:157-171
DOI: https://doi.org/10.37190/msc192613
 

ANALYSIS OF SAFETY FACTOR OF SECURITY PLATES IN THE MINE "TREPÇA" STANTËRG
Rafet Rafi Zeqiri, Hadji Riheb, Zighmi Karim, Guesmi Younes, Boudjellal Rania, Mahleb Aniss
Mining Science 2019;26:21-36
DOI: https://doi.org/10.37190/msc192602
 

A DATA DRIVEN DECISION MAKING APPROACH FOR LONG-WALL MINING PRODUCTION ENHANCEMENT
Amid Morshedlou, Hesam Dehghani, Hadi Hoseinie
Mining Science 2019;26:7-20
DOI: https://doi.org/10.37190/msc192601
 
Sign up for email alerts
 
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2353-5423
ISSN:2300-9586
Journals System - logo
© 2006-2025 Journal hosting platform by Bentus
Scroll to top