PL EN
Examination and assessment of the impact of working conditions on operating parameters of selected conveyor belts
 
Więcej
Ukryj
1
Politechnika Wrocławska
 
2
Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Poland
 
 
Autor do korespondencji
Mirosław Bajda   

Politechnika Wrocławska
 
 
Mining Science 2022;29:165-178
 
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The effect of the operation of two textile-core conveyor belts, type B-1600 P-1600/5 8+4 H, which operated in one of the lignite mines, on their strength and operating parameters was determined. During the operation of the belts on the conveyor, the amount and type of spoil transported were recorded, as well as the belt's operating time. The results of tests on the strength parameters of the belts in operation were compared with the results of tests performed on the same belts before their operation.
 
REFERENCJE (16)
1.
ANDREJIOVA M., GRINCOVA A., MARASOVA D., 2020, Analysis of tensile properties of worn fabric conveyor belts with renovated cover and with the different carcass type, Eksploatacja i Niezawod-.
 
2.
ność – Maintenance and Reliability, 22, 472–481; http://dx.doi.org/10.17531/ein....
 
3.
BAJDA M., 2019, IOP Conf. Ser.: Earth Environ. Sci., 221, 012098, DOI: 10.1088/1755-1315/221/1/012098.
 
4.
BAJDA M., HARDYGORA M., 2018, The influence of natural ageing processes on the strength parameters of steel cord conveyor belts, International Journal of Mining, Reclamation and Envi-ronment, DOI: 10.1080/17480930.2018.1436030.
 
5.
BARDZINSKI P., JURDZIAK L., KAWALEC W., KRÓL R., 2020, Copper ore quality tracking in a belt conveyor system using simulation tools, Natural Resources Research, 29 (2), 1031–1040, DOI: 10.1007/s11053-019-09493-6.
 
6.
BARDZINSKI P.J., KROL R., JURDZIAK L., 2019, Empirical model of discretized copper ore flow within the underground mine transport system, International Journal of Simulation Modelling, 18 (2),.
 
7.
279–289, DOI: 10.2507/IJSIMM18(2)473.
 
8.
BŁAŻEJ R., JURDZIAK L., KIRJANÓW-BŁAŻEJ A., BAJDA M., OLCHÓWKA D., RZESZOWSKA A., 2022, Profitability of Conveyor Belt Refurbishment and Diagnostics in the Light of the Circu-lar Economy and the Full and Effective Use of Resources, Energies, 15 (20), 1–15, DOI: 10.3390/en15207632.
 
9.
BORTNOWSKI P., KAWALEC W., KRÓL R., OZDOBA M., 2022, Types and causes of damage to the conveyor belt – review, classification and mutual relations, Engineering Failure Analysis, 140, DOI: 10.1016/j.engfailanal.2022.106520.
 
10.
DOROSZUK B., KRÓL R., 2019, Analysis of conveyor belt wear caused by material acceleration in transfer stations, Mining Science, 26, 189–201, DOI: 10.5277/msc192615.
 
11.
JURDZIAK L., 2000, The conveyor belt wear index and its application in belts replacement policy. Proceedings of the Ninth International Symposium on Mine Planning and Equipment Selection, Athens, 6–9 November 2000, A.A. Balkema, 589–594.
 
12.
KIRJANÓW-BŁAŻEJ A., BŁAŻEJ R., KOZŁOWSKI T., RZESZOWSKA A., 2022, Innovative diag-nostic device for thickness measurement of conveyor belts in horizontal transport, Scientific Re-ports, 12 (1), DOI: 10.1038/s41598-022-11148-1.
 
13.
KRÓL R., 2017, Studies of the durability of belt conveyor idlers with working loads taken into ac-count, Paper presented at the IOP Conference Series: Earth and Environmental Science, 95 (4), DOI: 10.1088/1755-1315/95/4/042054.
 
14.
MARASOVA D., AMBRISKO L., ANDREJIOVA M., 2017, Examination of the process of damaging the top covering layer of a conveyor belt applying the FEM, Measurement, 112, 47–52, DOI: 10.1016/j.measurement.2017.08.016.
 
15.
RUDAWSKA A., MADLEŇÁK R., MADLEŇÁKOVÁ L., DROŹDZIEL P., 2020, Investigation of the effect of operational factors on conveyor belt mechanical properties, Appl. Sci., 10, 4201.
 
16.
WALKER P., DOROSZUK B., KRÓL R., 2020, Analysis of ore flow through longitudinal belt con-veyor transfer point, Eksploatacja i Niezawodność, 22 (3), 536–543, DOI: 10.17531/ein.2020.3.17.
 
eISSN:2353-5423
ISSN:2300-9586
Journals System - logo
Scroll to top